Capacities for our Commercial Type Standart Air Coolers range between 0,5 KW to 43,4 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10 (mm) fin distances and are equipped with electro-staticly powder coated casings.

General Product Properties

• Coils are made with copper tubes and aluminium fins.
• End-plates are made of aluminium.
• Casing is coated with electro-staticly powder painted.
• E1 and E2 type of heaters are considered

Options

• Inner Grooved copper tubes are available
• Pre-coated aluminium fins and copper fins are avaliable
• Casing can be made of stainless steel sheet metal
• Additional heaters
• Choice of EBM, Ziehl Abegg or equivalent fan
• Whole body epoxy coating with dipping

Capacities for our Commercial Type Standart Air Coolers range between 0,5 KW to 43,4 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10 (mm) fin distances and are equipped with electro-staticly powder coated casings.

General Product Properties

• Coils are made with copper tubes and aluminium fins.
• End-plates are made of aluminium.
• Casing is coated with electro-staticly powder painted.
• E1 and E2 type of heaters are considered

Options

• Inner Grooved copper tubes are available
• Pre-coated aluminium fins and copper fins are avaliable
• Casing can be made of stainless steel sheet metal
• Additional heaters
• Choice of EBM, Ziehl Abegg or equivalent fan
• Whole body epoxy coating with dipping

Capacities for our Commercial Type Standart Air Coolers range between 0,5 KW to 43,4 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10 (mm) fin distances and are equipped with electro-staticly powder coated casings.

General Product Properties

• Coils are made with copper tubes and aluminium fins.
• End-plates are made of aluminium.
• Casing is coated with electro-staticly powder painted.
• E1 and E2 type of heaters are considered

Options

• Inner Grooved copper tubes are available
• Pre-coated aluminium fins and copper fins are avaliable
• Casing can be made of stainless steel sheet metal
• Additional heaters
• Choice of EBM, Ziehl Abegg or equivalent fan
• Whole body epoxy coating with dipping

Our Blast Freezers are designed as 3 different types with 1/2” and 5/8” type copper tubes and are given with catalogue values of 5,75 KW to 75 KW, main design criteria is the maximum thermal efficiency. Blast Freezers are used to cool down or freeze any type of meat, dairy products and bakery products at very short time intervals. Such short and time and effective of freezing is used to ensure the freshness and life span of products.

General Product Properties :

• Coils are made with copper tubes and aluminum fins.
• End-plates are made of aluminum.
• Casing is coated with electro-staticly powder painted casings.
• Coil, Drain Tray, Fan and Drain Line defrost system

Options :

• Inner Grooved tubes are available
• Pre-coated aluminum fins and copper fins are avaliable
• Casing can be made of stainless steel sheet metal
• Additional heaters
• Choice of EBM, Ziehl Abegg or equivalent fan
• Whole body epoxy coating with dipping

Capacities for our Industrial Type Standart Air Coolers range between6 ,5 KW to 180 KW and are designed to obtain maxmimum thermal efficiency. Units are designed with 4-6-8-10-12 (mm) fin distances and are equipped with electro-staticly powder coated casings.

General Product Properties

• Coils are made with copper tubes and aluminium fins.
• End-plates are made of aluminium.
• Casing is coated with electro-staticly powder painted.
• E1 and E2 type of heaters are considered

Options

• Inner Grooved copper tubes are available
• Pre-coated aluminium fins and copper fins are avaliable
• Casing can be made of stainless steel sheet metal
• Additional heaters
• Choice of EBM, Ziehl Abegg or equivalent fan
• Whole body epoxy coating with dipping

These evaporators, extremely evolved and technologically updated, are manufactured in three standard series providing a wide range of cooling capacities, dimensions and applications:

• series _CE, suitable for applications with several refrigerants (R22, R407c, R404A, HFO …);
• series _CE version HP45, optimized  for applications with refrigerant R410a;
• series _BE, compact type and alternative to series _CE, available also in version HP45;
• series _FE, purpose designed for applications with refrigerant R134a and HFO.

WTK  also offers the possibility to carry-out special models for low temperature application and designed and produced in order to meet requirements of capacity higher than 3MW.

For all the above models the standard pressure vessel approval is the CE/PED, on demand it is available also the code DNV-GL.

From the page download you can download the selection software Avogadro for all the WTK products.